Gratiot County Mi Fire Pager Tones
I will be gathering all of the tones as I hear them and am able to record / decode them .
Gratiot County Mi Fire Pager Tones
I will be gathering all of the tones as I hear them and am able to record / decode them .
Today was a nice day out, so I decided to install the VHF scanner feed antenna on the Merrill Tower (#2). The antenna was a Radio Shack 2Meter 5/8wave mobile magnet mount. I removed the whip from the magnet assembly. I used a small “L” bracket for the mount. It is hose clamped to an existing pole that was unused on the tower. For now it just uses 50′ of RG-58 coax running down. I think the coax might be too short. I might need to extend it 10-15feet to reach where I want it inside the building, but maybe I can re-route it better. I need to look into that when I run the coax into the building.
These are the Fire and EMS Pager tones for Clinton County Mi. on 154.220Mhz
I will correspond the dept with the tones, as I discover them. I grabbed these during the weekly tone test. They are a combination of Motorola and Plectron tones.
RadioReference.com Audio Feed WordPress Widget
This is still in test phase.
You will need to Download and save to your PC, then upload into Plugins. Soon I will have them listed in the main WordPress listing.
I built a automatic bot to check RadioReference.com for active alerts on the live scanner audio feeds.
You can get instant alerts from this bot on Twitter by following @ScannerAlerts
Montcalm County Mi NOW LIVE!
Gratiot County Mi
Equipment:
1/4wave 144/440mhz vertical @20′ on tripod.
Radio Shack Pro-2030 Scanner
45 watt Solar Panel kit + battery for DC power.